Ultracentrifuge/High-Speed Centrifuge

⚠️ CAUTION

You must check the usage and precautions before using this device.

Before starting the operation, please read the "Centrifuge Safety" thoroughly to understand the centrifuge and its proper operation. 

Please make sure to:

  • Reserve enough time on the PPMS online booking system
  • Turn off centrifuge after use and return rotors to their "home"
  • Clean up all spills IMMEDIATELY if there is one
  • Enter the use of the centrifuge into the log book
  • Contact BLS Section for training and any assistance
     

  Beckman Coulter

#  

Model / Rotor

Location

Reservation
1

Ultracentrifuge [Optima L-90K]

  • SW28 Ti (6 x 38.5 ml)
  • 50.2 Ti (12 x 39 ml)
  • 70.1 Ti (12 x 13.5 ml)
 CB-B512 PPMS
2

Ultracentrifuge [Optima XPN-100]

  • 45 Ti (6 x 94 ml)
  • 50.2 Ti (12 x 39 ml)
  • 70.1 Ti (12 x 13.5 ml)
  • SW32 Ti (6 x 38.5 ml)
  • SW32.1 Ti ( 6 x 17 ml)
 L1-C453 PPMS
3

Ultracentrifuge [Optima MAX-XP]

  • TLS-55 (4 x 2.2 ml)

 

-OUT OF ORDER-

 L1-C453 PPMS
4

Ultracentrifuge [Optima XPN-100]

  • 45 Ti (6 x 94 ml)
  • 70.1 Ti (12 x 13.5 ml)
  • NVT 100 (8 x 5.1 ml)
  • SW32 Ti (6 x 38.5 ml)
  • SW41 Ti (6 x 13.2 ml)
  • SW60 Ti (6 x 4 ml)
 L2-C605a PPMS
5

Ultracentrifuge [Optima TLX]

  • TLN-100 (8 x 3.9 ml)
  • TLA-55 (12 x 2 ml)
  • TLA-100 (20 x 0.2 ml)
  • TLA-100.3 (6 x 4 ml)
 L2-C657 PPMS
6

Ultracentrifuge [Optima L-100XP]

  • 50.2 Ti (12 x 39 ml)
  • SW40 Ti (6 x 14 ml)
  • NVT 100 (8 x 5.1 ml)
  • VTi 50 (8 x 39 ml)
 L3-B778 PPMS
7

High-Speed [Avanti HP-26XP]

  • JLA-16.250 (6 x 250 ml)
 CB-B512 PPMS
8

High Speed [Avanti HP-20XP]

  • JA-12 (12 x 50 ml, conical tube)
  • JA-20 (8 x 50 ml)
  • JLA-10.500 (6 x 500 ml)
 L1-C356 PPMS
9

High-Speed [Avanti HP-20XP]

  • JA-17 (14 x 50 ml)
  • JA-18 (10 x 100 ml)
  • JLA-10.500 (6 x 500 ml)
 L2-C657 PPMS
10

High-Speed [Avanti HP-25]

  • JA-12 (12 x 50 ml)
  • JA-21 (18 x 10 ml)
  • JA-25.50 (8 x 50 ml)
  • JLA-9.1000 (4 x 1000ml)
  • JLA-16.250 (6 x 250 ml)
 L3-C722 PPMS

 

  Hitachi-Koki

#  

Rotor

Location

Reservation
1

Ultracentrifuge [CS 150 GXL]

  • S52ST (4 x 5 ml)
  • S55A (8 x 13.5 ml)
  • S140AT (10 x 2 ml)
  • S100NT (8 x 4 ml)
 L1-C453 PPMS
2

Ultracentrifuge [CP 80 WX]

  • P45AT (6 x 94 ml)
  • P50AT2 (12 x 40 ml)

L4F78

 

 PPMS
3

High-Speed [CR 21 G]

  • R15A (10 x 50 ml, 10 x 15 ml)
 L4F78 PPMS
4

Ultracentrifuge [CP 100 WX]

  • P40ST (6 x 13ml)
  • P50AT2 (12 x 40 ml)
  • P90AT (8 x 12 ml)

L5E27

 PPMS
5

High-Speed [CR 21 N]

  • R10A3 (6 x 500 ml)
  • R15A (10 x 50 ml, 10 x 15 ml)
  • R4S (16 x 15 ml, 4 x 50 ml)
 L5E27 PPMS
6

Ultracentrifuge [CS120GXII]

  • S50A (6 x 30 ml)
  • S55A2 (12 x 1.5 ml)
  • S50ST (4 x 7 ml)
  • S110AT (8 x 5 ml)
 L5E27 PPMS

 

  Tubes & Bottles

The Basic Lab Support Team does not provide centrifuge tubes and adapters.
Please purchase and use the tubes and adaptors needed for your experiment.

For Ultracentrifuge Use only specified tubes and adaptors by the manufacturer
For High-Speed centrifuge Disposable tubes and bottles are available to use.
Make sure to use matched sets of tubes, bottles, and adaptors.

Location map